Motion Detector
Detect, control, automate
PIR Motion Detector
The Motion Detector is one of the core elements of a security system. By tracking temperature changes in its field of view, it is able to accurately and quickly detect a person moving in the area. This information is immediately transmitted to the Smart HUB, which reacts accordingly and triggers an alarm. You will be notified of everything with push notifications in the app.
Impressive detection area
The Motion Detector is fitted with a state-of-the-art wide-angle lens (90°), which allows the detector to “observe” an area as large as 15 m x 24 m.
Full range of view...
The Motion Detector has an optional so called “creep zone” control feature. This means that the detector can also “see” what is going on directly below it. Thus, no one can approach it unnoticed.
... and operation
Communication between the Motion Detector and the Smart HUB takes place via radio and has a very large range. The detector is therefore perfect for use in flats and houses as well as small commercial premises.
More than just protection
Detection of movement can be a trigger for many smart home functions.
Make the most of the possibilities offered by the Motion Detector.
Two in one
The Motion Detector has a built-in temperature sensor, which allows heating systems to be used more efficiently. You can configure the system so that when a set temperature threshold is exceeded, the heating in the house is switched on or off.
Convenient installation
You can attach the Motion Detector to the wall easily using a special mounting tape. Are you changing your home decor? Fortunately, with this installation method, you can easily change the detector’s location when needed. For additional adjustability, you can use the special BRACKET D bolted holder. You can also mount the detector using screws.
Enclosure tampering detection
The Motion Detector features a special sensor that reacts to any attempt to open or detach the detector screwed to the wall. As a result, BE WAVE will trigger the alarm and you will be notified immediately with push notifications.
Easy configuration in the app
In the app, you can easily add a detector to your system and conveniently configure its settings. You can also determine the sensitivity level and operating mode of the device. The Motion Detector can perform security functions, automation functions or both at the same time – it’s up to you!
The technology driving BE WAVE
Secure wireless communication
Advanced energy management mechanisms
