Multipurpose Detector

Multipurpose Detector

5 operating modes – It’s your choice

One detector – many possibilities

The Multipurpose Detector offers multiple functions enclosed in a single device. It is you who decides what role in the system it should perform – and you have five options to choose from! When adding the Multipurpose Detector to your BE WAVE system, specify whether you want it to operate as a shock, opening, shock and opening, water flood or temperature detector. Regardless of what it is to respond to, it will transmit information about a specific event to the Smart HUB, which will trigger a corresponding action. And you will receive an appropriate notification on your smartphone.

1. Opening detector
2. Shock detector
3. Shock and opening detector
4. Flood detector
5. Temperature sensor

Shocks heralding danger

Shock detector mode? What can you use it for? When installed on a door or window frame, the Multipurpose Detector detects shocks accompanying attempts to force them. This allows your BE WAVE system to detect an intruder really early, before they cause more damage or even get into the protected area. As a response, an alarm will go off and, in addition, surrounding lights may come on to illuminate the vandal.

So that the door does not stand open

Opening a window, a door or perhaps a garage gate? This type of event can be responded to by the Multipurpose Detector in the opening detector mode.

And here is an important point! When protection is active, the detection of opening will trigger an alarm. However, the detector can also contribute to performing smart home functions – for example, when a window is opened, the Smart HUB will temporarily switch off the heating in a particular room. Similarly, the light in the vestibule can turn on when you open the front door.

Two in one

Multipurpose Detector in a dual role? Sure thing! Select the mode: “shock and opening detector” so that the device simultaneously protects the door or window by detecting both attempts to force and open them.

Monitor the presence of water

Select the flood detection mode and connect a special probe to the detector, which can even be mounted in a narrow gap due to its small size. Depending on how you program the Smart HUB, you can receive notifications about both the presence of water or its drop below the probe level – for example, when a leak appears in the water installation, or when the water level in the rainwater tank, from which you water the garden, drops below the specified level. Moreover, the Smart HUB can react and close the relevant valve to prevent further flooding or open it to refill the water in the tank.

If you turn on the protection mode in the detector, the detection of water (flooding) will trigger an alarm. Alternatively, you can use another device – Flood Detector.

Temperature measurement

The Multipurpose Detector has a built-in temperature sensor that is active in each of the preset modes – you can check its reading conveniently in the app. However, sometimes the location of a detector, e.g. for detecting the opening of a door, is not optimal for measuring the heat in a given room. If this is the case, set the Multipurpose Detector to the temperature sensor mode and select a suitable installation location for the device. All of this is in order to use it to effectively manage the operation of heating systems.

Working in tougher conditions

The device can be housed in a special OPX-1 weather-resistant enclosure. This means that you can install the Multipurpose Detector outside the building to, for example, use it for monitoring the entrance gate, wicket gate, or… letterbox. It will prove its value not only in the protection mode by triggering an alarm when someone unwanted opens the gate. Make use of the possibilities offered by the detector operating outdoors also for automation functions, e.g. on the driveway, to have the light switched on as soon as the entrance to the property is opened. Remember! It is necessary (if the detector works in the opening or shocking and opening mode) to include the also hermetically sealed OPXM-1 magnet.

Long communication range​

You can quickly and conveniently attach the Multipurpose Detector to a wall or frame, using mounting tape. Naturally, if you need a Grade 2 protection, you can bolt the detector to the mounting surface.

Enclosure tampering detection

The Multipurpose Detector features a special sensor that reacts to any attempt to open or detach the detector bolted to the mounting surface. As a result, BE WAVE will trigger the alarm and you will be notified of the tampering immediately with push notifications.

Convenient installation

You can quickly and conveniently attach the Multipurpose Detector to a wall or frame, using mounting tape. Naturally, if you need a Grade 2 protection, you can bolt the detector to the mounting surface.

Take your pick

The device doesn’t always need to be visible. Sometimes it is better for it to “blend in” with the surface on which it is installed. The Multipurpose Detector is available in three colours: white, brown, and dark grey.

Easy configuration in the app

In the app, you can easily add a detector to your system and conveniently configure its settings. You can also determine the sensitivity level and operating mode of the device. The Multipurpose Detector can perform security functions, automation functions or both at the same time – it’s up to you!

The technology driving BE WAVE

Advanced energy
management
mechanisms

Secure wireless communication

Advanced energy
management
mechanisms

Multipurpose Detector

5 operating modes – It’s your choice

With just a few clicks, you'll stay current with all the latest BE WAVE news.